1.Operating Environment When purchasing a forklift, the primary consideration is its operating environment, that is, whether the forklift will be used indoors or outdoors. If the forklift is mainly used outside the warehouse, it is recommended to choose an internal combustion forklift driven by gas, liquid petroleum, or diesel. If the forklift needs to operate in a cold outdoor environment, a gasoline-driven forklift is more suitable. It is particularly important to note that diesel forklifts need to be kept in continuous use and avoid frequent engine shutdowns; frequent starting of the forklift by the user may cause damage to it. In addition, to ensure the performance of diesel forklifts, it is recommended to change the engine oil regularly. 2.Indoor Warehouse Forklifts In indoor environments, such as warehouses, electric forklifts exhibit significant advantages. Compared with internal combustion forklifts, their most prominent feature lies in their low noise and pollution-free characteristics. Although the initial purchase cost of electric forklifts is slightly higher, their operating costs are relatively low, mainly because they do not require fuel and do not need to frequently replace components such as engine oil. In addition, the maintenance costs of electric forklifts are also quite economical. For a forklift, during its normal service life, the maintenance cost per hour is only 2 to 6 yuan. Of course, when using electric forklifts, the condition of the battery must be closely monitored, and water level checks and battery protection are also essential. 3.Selection of Forklift Models When selecting a forklift model, the first consideration is the applicable working scenario and the specific conditions of the warehouse. For example, if the forklift is mainly used for loading and unloading trailers, a front-wheel drive, sit-down counterbalance forklift is a more appropriate choice. In addition, if the forklift needs to shuttle in narrow spaces to load and unload goods onto trailers, special attention should be paid to the "free lift" function, that is, the forks can be raised independently without the mast being raised to meet the operational requirements. At the same time, the width of the warehouse aisle is also a key factor in determining the forklift model. 4.Capacity Capacity is a factor that must be carefully considered when purchasing a forklift. Generally, it is recommended to choose a forklift with a capacity slightly larger than the daily requirement. For example, if the pallet load that needs to be handled frequently is 900KG, it is more advisable to choose a forklift that can carry 1300KG. In addition, when purchasing a forklift for handling flammable or hazardous materials, be sure to carefully check its safety rating. Forklifts of different ratings have different levels of safety. 5.Trade-off between Price and Efficiency When purchasing a forklift, price is indeed a factor to be considered, but more importantly, the availability...

Damaged pallets not only reduce productivity but also significantly increase costs. Improper operation of forklifts is often the main culprit for pallet damage. Over time, the costs of pallets and their maintenance keep rising, which will inevitably impact the company's profits. Although there are various reasons for pallet damage, mistakes in the forklift handling process are the most common. Fortunately, many pallet damage problems can be effectively avoided through standardized operation procedures and enhanced training. The following are 10 practical tips to reduce forklift damage to pallets: 1.Reduce Travel Speed Slowing down is a crucial technique for limiting forklift damage to pallets and is closely related to many of the other techniques you will read below. Slowing down gives forklift operators more reaction time to handle pallets correctly and reduces situations such as short forks, improper tooth spacing, and other errors. In addition, slowing down can prevent the mast, forks, or other parts of the lift from hitting the pallets or the products they carry. Reducing rushed operations and using forklifts more gently will also extend the service life of forklifts. It is extremely important to slow down when picking up loads, putting down loads, and stacking or forking pallets. 2.Use Appropriate Pallets Does the pallet have sufficient load - bearing capacity? Slight differences in the size of pallet materials and the layout of the structure can make a big difference in its load - bearing capacity. Overloaded or mismatched pallets are more likely to break, crack, or shatter and are more vulnerable to damage due to improper forklift handling. Weight distribution is another important factor when using the right pallet. Even if the pallet can bear the load weight, uneven weight distribution will affect its performance. Improper weight distribution will put stress on the pallet in a non - designed way, leading to failure. Using the Pallet Design System (PDS) can help ensure that the pallet is loaded correctly and can perform its intended function. 3.Do Not Turn Until Forks Are Completely Withdrawn from the Pallet Stringer damage is a type of damage that is extremely harmful to pallets. Stringers are the key components that hold the pallet together. The failure of stringers will immediately lead to a significant loss of the pallet's load - bearing capacity. This particular type of damage is usually caused by forklift drivers releasing the load too early and turning out of the pallet while the forks are still in it, causing the forks to impact the stringers, resulting in strain and damage. Forklift drivers must ensure that the forks are completely withdrawn from the pallet before turning out. 4.Never Drag or Push Pallets Dragging pallets means pushing them across the floor. Pallets are not designed to be pushed along the ground. Doing so will apply inappropriate lateral stress to the pallet, destroying its load - bearing capacity. Dragging also c...

The sales data of powered industrial vehicles (forklift trucks) in China in January has been released. After setting historical monthly sales records for 10 consecutive months, this month finally showed a slight "fatigue". With sales of 93,648 units, it failed to exceed the 110,695 units sold in the same period last year, ranking second in the historical data for the same period, with a year-on-year decline of 15.4%. The reason for this is closely related to the impact of the Spring Festival factor, which led to a decline in the domestic market. The domestic sales volume was 54,950 units, a year-on-year decrease of 24%. However, looking at the historical data for the same period, apart from the 110,695 units sold last year, the 93,648 units sold in January this year still outshine all the historical data for the same period! In other words, the forklift truck market has been in a growth period for a long time. From 337,000 units in 2014 to 1.29 million units in 2024, the sales volume has nearly tripled in ten years, and there is still no sign of reaching its peak. The export performance is even more remarkable. From 93,000 units in 2014 to 480,000 units in 2024, the sales volume has increased by more than four times in ten years! In January this year, it set a new sales record for the same month for the 11th consecutive time. The reason why it can maintain such a strong momentum is, of course, closely related to the continuously growing market demand. The demand for forklift trucks is widely distributed across multiple industries, and the development trends of these industries are the key driving forces for the continuous growth of the forklift truck market. Firstly, the manufacturing industry, which covers many fields such as automobiles, electronics, and machinery. During the production process, the handling of raw materials, components, and finished products cannot be done without forklift trucks. As the manufacturing industry continues to expand, with the increase in factory scale and production volume, the demand for forklift trucks naturally rises. Especially against the backdrop of industrial upgrading, the concept of lean production prompts enterprises to optimize their logistics processes, putting forward higher requirements for the efficient and precise handling capabilities of forklift trucks, further stimulating the growth of demand. Secondly, the logistics and warehousing industry. The booming development of e-commerce has brought explosive growth to the logistics and warehousing industry. A huge amount of goods flowing in and out of warehouses requires a large number of forklift trucks for loading, unloading, stacking, and sorting operations. The popularization of automated stereoscopic warehouses has further increased the operational intensity and efficiency requirements for forklift trucks. Not only ordinary forklift trucks are needed, but there is also a strong demand for special forklift trucks such as high-level forklift trucks...

JAC Heavy -duty trucks export to Gulf region in batches Recently, The Delivery Ceremony Of JAC Heavy-duty Trucks Exported To the Gulf Region was held in Hefei. This event marks a significant breakthrough of JAC Group in heavy truck export to the Gulf region and even the world. The Gulf region, a critical hub and partner for co-building the “Belt and Road”, has always been one of the most important overseas strategic markets of JAC. The batch export of heavy-duty trucks to the Gulf region is not only a new starting point for local market, but also a milestone event for JAC's globalization strategy.